ADHESIVES

Devcon Flow-mix 5 Minute Epoxy Use On Metal, Wood, Glass, Ceramics, & Masonry Uses An Auto Mix Application To Mix Epoxy For Easy Application Bonds In...

Ideal for joining wood, metal, concrete, glass, ceramics, china and more Sets in 5 minutes with strength up to 1,500 pounds per square inch 2...

Devcon Flow-Mix Cold Weld Epoxy is an easy alternative to welding and soldering. For best results, pull plunger back slightly (1/8in) to allow air...

Devcon epoxy adhesive cures and joins materials together by a chemical reaction between the resin and hardener. This reaction results in a high...

two-part, high strength, cold-welding epoxy for use on all types of metal repairs;Contains a steel alloy that will not rust;Handling time: 60...

Multi-purpose, fast-drying, nitrocellulose household cement Dries fast, clear and tough; easy to apply and water resistant Special cap prevents...

Insta-Cure has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded...

Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one...

Insta-Cure+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one...

Maxi-Cure extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE is the best choice for plastic model assembly. When...

Insta-Flex+ clear rubber toughened has similar qualities to our black IC-2000 but can be used in applications where you do not want the adhesive to...

Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be...

SUPER-GOLD™ and SUPER-GOLD+™ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no...

INSTA-SET is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during...

MID-CURE 15 min. epoxy is used in larger areas where more working time is needed. It is more water resistant and can be used as a substitute for...

SLOW-CURE™ 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and...

FINISH-CURE 20 min. epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by...