ADHESIVES

Devcon Flow-mix 5 Minute Epoxy Use On Metal, Wood, Glass, Ceramics, & Masonry Uses An Auto Mix Application To Mix Epoxy For Easy Application Bonds In...

Ideal for joining wood, metal, concrete, glass, ceramics, china and more Sets in 5 minutes with strength up to 1,500 pounds per square inch 2...

Devcon Flow-Mix Cold Weld Epoxy is an easy alternative to welding and soldering. For best results, pull plunger back slightly (1/8in) to allow air...

Devcon epoxy adhesive cures and joins materials together by a chemical reaction between the resin and hardener. This reaction results in a high...

Fills and seals worn surfaces. Hardens like steel. Can be drilled, sanded, and painted. Not affected by water, oil, or most solvents. 3.5 oz.

25 ML Syringe; Plastic Steel Epoxy; Steel Filled Heavy Duty Epoxy; High Bond Strength; 2;500 PSI; Slow Setting Formula For Extra Working Time; Fills...

Insta-Cure has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded...

Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one...

Insta-Cure+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one...

Maxi-Cure extra thick CA is the best CA for most plastics, including GEz Lexan MAXI-CURE is the best choice for plastic model assembly. When used...

IC-2000 is a rubber-toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces. The black colored CA has added...

SUPER-GOLD and SUPER-GOLD+ are our odorless INSTA-CURE CAs They are non-frosting and take only 2 or 3 seconds longer to bond. There are no fumes that...

Adhesive/Glue

INSTA-SET is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during...

QUIK-CURE 5 min. epoxy cures to a slightly flexible consistency. This lack of brittleness allows it to form a lasting bond in areas subjected to high...

SLOW-CURE 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more...

FINISH-CURE™ 20 min. epoxy is an excellent, low odor substitute for polyester resins. It can be used for applying fiberglass cloth to wood or by...

10 to 25 second working time Grip is useable within 5 minutes Works on fiberglass, metal and plastics 1oz. bottle will bond up to 12 sets of grips...